Occupational Safety & Health Administration
Form Approved OMD No. 41-R1387

Material Safety Data Sheet

Section I

Manufacture’s Name:

American Polymer Standards Corp

Emergency Telephone No.

440-255-2211

Address (Name, Street, City, State, & Zip Code:

8680 Tyler Blvd., Mentor, OH  44060

Chemical Name & Synonyms:

Poly(Ethylene Oxide)

Trade Name & Synonyms:

 

Chemical Family:

Formula:

(CH2CH2O)n

Section II (Hazardous Ingredients)

Paints, Preservatives,

 & Solvents

TLV

Units

Alloys &

Metallic Coating

TLV

Units

Pigments

N/A

Base Metal

N/A

Catalyst

N/A

Alloys

N/A

Vehicle

N/A

Metallic Coatings

N/A

Solvents

N/A

Filler Metal

N/A

Additives

N/A

Others

N/A

Others

N/A

 

Hazardous Mixtures of Other Liquids, Solids, or Gases

SECTION III (Physical Data)

Boiling Point (F)

N/A

Specific Gravity (H20 = 1)

N/A

Vapor Pressure (mm Hg)

N/A

% Volatile by Volume

N/A

Vapor Density (air = 1)

N/A

Evaporation Rate

N/A

Solubility in Water

Complete solubility at temps up to 98°C

Appearance & Odor:  White powder, Has characteristic odor

Section IV (Fire & Explosion Hazards Data)

Flash Point: N/A

Flammable Limits: N/A

Extinguishing Media: Water, dry chemical powder, carbon dioxide & foam

Special fire fighting procedures: Firefighter must wear SCBA & full protective clothing.

Unusual Fire & Explosion Hazards:  Water in a fine spray can be used. Do not use solid stream of water, it may scatter molten material and spread a fire.

SECTION V (Health Hazard Data)

Threshold Limit Value: N/A

Effects of Overexposure:

Emergency & First Aide Procedures: In case of contact immediately wash skin with soap and copious amounts of water. EYES: flush with copious amounts of water for 15 min. Assure adequate flushing of eyes by separating eye lids. If inhaled remove to fresh air. Remove and wash contaminated clothing promptly.

SECTION VI (Reactivity Data)

Stability:

Unstable £              Stable T

Conditions to avoid:

Incompatibility (materials to avoid):

Hazardous Decomposition Products: Carbon Monoxide

Hazardous Polymerization:

May Occur £      Will not Occur T

 Conditions to avoid:

 

SECTION VII (Spills or Leak Procedures)

Steps if material is released or spilled: Do not raise dust. Sweep and collect in a suitable container disposal. Wash & ventilate spill site.

Waste Disposal Method: Obverse Federal, State, and Local Laws.

Section VIII (Special Protection Information)

Respiratory Protection (Specify type): OSHA/MSHA approved respirator

Ventilation:

Local Exhaust: Preferred

 

Special:

Mechanical:  

Other:

Protective Gloves: Chemical resistant gloves

Eye Protection : Safety goggles

Other Protective Equipment: Eye bath and safety shower.

SECTION IX (Special Precautions)

Precautions in Handling & Storing: Store in a cool dry place. Keep storage container tightly closed.

Other Precautions: Avoid prolonged or frequent exposure. Wash thoroughly after handling

 Last Review: March 2007